Heusinkveld Sim Pedals Sprint Baseplate
If you’re using the Sim Pedals Sprint near their max power output, they’ll need a very solid mount on your rig. If you want to mount your pedals on a base plate first instead of mounting them separately, then our Sim Pedals Sprint Baseplate is your product of choice.
Because the Sim Pedals Sprint can withstand high brake loads, a solid mounting on your simulator setup is an absolute must. If you don’t want to mount the pedals directly to your rig, but want to place them on a baseplate first, we offer an optional rigid mounting solution. The Sim Pedals Sprint base plate allows for flexible positioning of individual pedals and also comes with an adjustable heel plate.
What a baseplate is for:
Because the Sim Pedals Sprint brake can withstand up to 65kg of force, standard rigs pedal mounting plates often exhibit excessive flexing under these loads. This baseplate helps to create a sturdy platform to mount the pedals on your rig. The baseplate assembly consists of several elements: a pedal plate on which you mount the pedals, a height-adjustable heel plate and two brackets that are used to attach the baseplate to an underlying frame. Mounting hardware is included to mount the pedals to the baseplate, as well as hardware to mount the baseplate to a 6mm thick base plate.
The mounting points for the pedals are slots that allow lateral adjustment of individual pedals. The dimensions of these lateral slots are 29mm for the brake and 24mm for the throttle and clutch. Each pedal can also be adjusted forwards and backwards 12.5mm through the slots in the pedal feet themselves.
The heel plate of the Sim Pedals Sprint Baseplate is adjustable in height. You can place it in the default position (0mm height) or use spacers to raise it. Two types of spacers (20mm and 40mm) are included to place the heel plate in an elevated position.
This baseplate is only compatible with our Sim Pedals Sprint product. The mounting holes on the brackets are compatible with TM T3PA and T3PA Pro (235mm) pedal sets. There are a total of six mounting points on the brackets, providing plenty of options for mounting the baseplate on aluminum profiles or creating your own drilling template to install the baseplate on your rig.
Keep in mind that with this base plate you cannot install the pedals on a floor without further support, or in a wheel stand where there is no solid connection between the pedals and the saddle. A full frame rig/simulator is always required.